DeepStack is available on all Arm64 devices including Raspberry PI, Qualcomm DragonBoard 410c, AWS Graviton Servers and any device with a Arm64 processor and a Linux 64 Bit OS.
Note for Raspberry PI Users: While Raspberry uses a 64 bit processor, Raspbian OS is 32 bit, to run DeepStack on Raspberry PI, you should install the 64 Bit Raspbian Image, find it here Raspbian OS 64 Bit Images you can also install a 64 Bit OS such as Balena OS and Ubuntu Server.
Recommeded Hardware Spec: While DeepStack can run successfully on a 1GB Ram device, we recommend using a device with 8GB Ram for good performance.
Follow the steps below to install DeepStack on a Arm64 device.
If you already have docker installed, you can skip this step.
sudo apt-get update sudo apt-get install curl curl -fsSL get.docker.com -o get-docker.sh && sh get-docker.sh
sudo docker pull deepquestai/deepstack:arm64-2021.06.1
sudo docker run -e VISION-DETECTION=True -p 80:5000 deepquestai/deepstack:arm64-2021.06.1
To run with the face apis, simply use -e VISION-FACE=True instead, for scene, use -e VISION-SCENE=True.
-e VISION-DETECTION=True This enables the detection API.
-p 80:5000 This makes DeepStack accessible via port 80 of the machine.
Once installed, run the example detection code to verify your installation is working.
You can run DeepStack with all the APIs enabled. Use the command below
sudo docker run -e VISION-SCENE=True -e VISION-DETECTION=True -e VISION-FACE=True -p 80:5000 deepquestai/deepstack:arm64-2021.06.1